Skate

Items 1 to 10 of 31 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Set Descending Direction
  1. Fort Knox

    Carver Skateboard- 31" Fort Knox C7

    $229.00

    Out of stock

    Fort Knox Pro Model Taylor had a hand in every aspect of the design of his signature model, from the template shape and specs to the graphics. Everything is designed to work with Taylor's style of power surfing, from the wide tail to the slightly stretched wheelbase, which provides a bit more stability at speed. Specs:- 9 7/8" wide 6 3/8" tail 3 1/2" nose 16 3/4" wheelbase Trucks Front - 6.5" C7 Rear - 6.5" C2 There are also 3 wheel options to choose from:- 1) 70mm Smoke Mags (78A) 2) 65mm Aqua Mags (81A) 3) 70mm Aqua Mags (81A) Learn More
  2. Proteus 30.5" CX black cx trucks

    Carver Proteus 30.5" CX

    $199.00

    Out of stock

    When we set out to make a skateboard that surfed, we tried to get as close to the feeling of pumping, carving on rail and driving through a roundhouse as we could. With the Proteus surfskate we took that concept and tailored the specifics to match this particular surfboard, so that you could more easily transition between practicing your maneuvers on land and taking them to the waves. So the new Proteus skateboard shares the same blunt-nose template, allowing for a wider stance with better front foot support and the same clipped nose for reduced swing weight when snapping a turn. The shape contour features a slight spoon nose for better control, as well as a full skate tail for ollies, pivots, boneless airs and all other standard skateboard tricks. At the heart of the system are the trucks, an asymmetrical set that creates the same rear-pivot snap you get surfing. Just a little rail-to-rail action and the board immediately starts to thrust forward, encouraging good form and strengthening your surfing muscles. Even the wheels are designed to increase grip over standard wheel designs, with a concave surface that flexes to hug the road, allowing you to lean into your turns like never before, and coming the closest to the kind of hold you get on rail in the water. Deck Specs: 9 7/8" wide Learn More
  3. Carver 29" New Swallow tail

    Carver Skateboard - 29" New Swallowtail C7

    $219.99

    Out of stock

    This little board handles like its name sake, fast and loose. The short wheelbase makes this mini the easiest board to pump, effortlessly carving non-stop lines without ever putting your foot down. The snappy handling and perpetual motion turns your driveway and curb cut into a micro-skatepark. Specs:- 9 3/8" wide 5 7/8" tail 3 7/8" nose 15 3/4" wheelbase 1) Ready to ride with 6.5" C7 front and C2 rear trucks There are also 4 wheels to choose from:- 1) 65mm Smoke Radials (78A) 2) 65mm Aqua Mags (81A) 3) 70mm Smoke Mags (78A) 4) 70mm Aqua Mags (81A) Learn More
  4. Carver Skateboard - 31" Da Monsta C7

    Carver Skateboard - 31" Da Monsta C7

    $229.00

    Out of stock

    The 31" Da Monsta Pro Series. It's a collaboration with master shaper Todd Proctor from Ventura and is a surfskate with the same look and feel of his popular 'Da Monsta' surfboard model. Describing Da Monsta as a surfboard you can skate on waves, the pairing with our surfing skateboard was just a perfect fit. It's further cross-pollinating performance between surf and skate, and gives riders a tuned pair of boards to do that on. Specs:- Deck 9 3/4" wide 6 1/4" tail 3 1/2" nose 17" wheelbase Trucks front - C7 6.5" rear - C2 6.5" There are also 3 wheels to choose from:- 1) 70mm Smoke Mags (78A) 2) 70mm Aqua Mags (81A) 3) 65mm Aqua Mags (81A) Learn More
  5. surf punk 32" c7

    Carver Skateboard - 32" Surf Punk C7

    $219.99

    Out of stock

    Light and full of pop, this is the ultimate surf/skate mash up for progressive riding. Ollies, old-school airs and cutting edge surfskating follows the same aerial progression of high performance surfing. Acclaimed skater and artist Jason Adams painted the Marylyn portrait graphic. Specs:- 9 3/16" wide 6 1/2" tail 6 3/8" nose 18" wheelbase There are 2 truck widths to choose from:- 1) Ready to ride with 6.5" C7 front and C2 rear, We are currently out of stock of the 6.5" truck. We should have new stock in soon, Please email to pre order. 2) Ready to ride with 5" C7 front and C2 rear There are also 4 wheels to choose from:- 1) 65mm Smoke Radials (78A) 2) 65mm Aqua Mags (81A) 3) 70mm Smoke Mags (78A) 4) 70mm Aqua Mags (81A) Learn More
  6. Resin C7

    Carver Skateboard - 31" Resin C7

    $219.99

    Out of stock

    The narrow nose template and wide tail is just like your favorite squash-tail wave killer. It's plenty wide and just the right length so you can snap and pump the flats with ease, and drop in to any hill with confidence. Specs:- 9 3/4" wide 6 1/4" tail 3 1/2" nose 17" wheelbase Trucks Front - 6.5" C7 truck Rear - C2 rear truck. There are also 3 wheel options to choose from:- 1) 70mm Smoke Mags (78A) 2) 70mm Aqua Mags (81A) 3) 65mm Aqua Mags (81A) Learn More
  7. Resin 32.5" USA C7

    Carver Skateboard - 32.5" Resin USA C7

    $229.99

    Out of stock

    We refer to this board around the factory as the ‘Masters’ model, because we recognized that the bigger guys on the USA Surf Team needed a model too. Like a 6’ 10” surfboard, this is a performance board for the men on the team, a board that holds a fast line with its extended wheelbase, all the while cutting smooth lines across the asphalt with the stability of full sized performance deck. The longer 18” wheelbase feels best at a wide stance with your feet over the trucks for the most power in those bigger carves. USA Team surfers use this model to train for strength and power, warm up before paddling out and skate the bigger hills with stability. The classic squash tail template gives you a proper tail to pivot from but removes some of the weight from the nose, easing rail-to-rail transitions. The artwork is a classic resin surfboard design in the colors of the American flag, representing the essence of the team concept: Surfing America with an emphasis on SURF. This board will work equally well with either the C7 or CX truck sets; the C7 set will give the board a more flowing performance with a great range of adjustability, the CX set will give the board a more snappy performance with a lighter frame. Comes set-up with C7 front truck and C2 rear truck. Specs:- 9 7/8" wide 6 1/2" tail 3 5/8" nose 18" wheelbase Learn More
  8. 31.75" Kerrzy Kerlage

    Carver Skateboard - 31.75" C7 Kerrzy Kerrlage

    $229.99

    Out of stock

    Like any dedicated surfer, team rider Josh Kerr has different boards for different conditions. As part of his Carver quiver he wanted a longer diamond tail deck for bigger carves and faster lines to compliment his shorter 28” Snapper model. We kept the width slightly pulled in to keep the weight down, and with a little extra length you can widen your stance when pumping for speed and get plenty of leverage over the front truck. Since the longer wheelbase can handle more speed, this can handle those ‘big days’ when you want a board that will hold a fast line downhill, but still snap a turn when you get to the top of those big banks. During our design session with Kerrzy he described the photos he wanted on this board; a hot girl, waves, a thatched hut, … all the elements of a great surf lifestyle. Taken by his friend and filmer Matt Kleiner, they are a true view into the life of a traveling surfer. Recommended with the CX truck set for a more progressive skate performance. Comes set-up with C7 front truck and C2 rear truck. Specs:- 9 3/4" wide 6 3/8" tail 3 3/4" nose 17 1/2" wheelbase Learn More
  9. Flying Manta

    Carver Skateboard - Flying Manta

    $229.99

    Out of stock

    We were stoked to meet Sean Mattison, he has a natural connection with the performance of our surfskates. To capture his dynamics on land we kept the deck a short 31 ½” overall but pushed the trucks out for a longer wheelbase. At 18 ½” it’s comparatively longer than other boards of similar length, giving it a more drawn-out line and very fast pump. Comes set-up with CX front truck and C2 rear truck. Specs:- 9 3/4" wide 6" tail 2 7/8" nose 18 1/2" wheelbase Learn More
  10. Carver Eggbeater

    Carver Skateboard - 30" Eggbeater C7

    $219.99

    Out of stock

    We love progressive surfing as much as the next shredder, but we also love the current look back at vintage surfboards and traditional styles of wave riding. Inspired by all the little Eggs we’re seeing in the line-up, we made the Eggbeater in the style of a single fin hull, a rounded pintail that’s still short enough to snap turns as much as it carves smooth and flowing lines. Even the graphic is a throwback to traditional surfboard designs, with a darker rail, center stringer and visible tail patch. The full nose let’s you get a fairly wide stance for such a short board, and the proper kick tail gives you the all-important ability to pivot turns and hop over cracks and bumps. A great all-around board for cruising and pumping. Comes set-up with C7 front truck and C2 rear truck. Specs:- 9 3/4" wide 6 1/8" tail 3 1/8" nose 16 3/4" wheelbase Learn More

Items 1 to 10 of 31 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Set Descending Direction